Skip to content

Whole-home audio control

Your multizone amplifier, on one screen.

Electrofonic is an iPhone app that replaces the one your amplifier came with. It finds the amplifier on your home network by itself, then shows every room on one screen, under the names you already use for your zones and sources.

Coming to the App Store

Requires iPhone, iOS 18 or later.

The Electrofonic Controls screen, showing every zone in the house on one screen with its volume and current source, and a Main Floor group whose two zones share a single fader.

What it does

Three zones of the Controls list — Primary Bedroom playing TV at 12, Patio on WiiM Pro at 18, Office playing Turntable at 8 — each row carrying its own volume slider, mute, and power control.

See every zone at once

Every zone is on one screen with its volume, its source, and its power, so you can see what's playing where without walking around the house. All On and Mute All cover the whole house from the same screen. A zone that's off stays in the list and shows that it's off. With Pro, you can hide zones that were never wired. Drag a fader and the zone follows, one step at a time.

The Kitchen zone: bass at +5 dB, treble at +4 dB, balance centered between L and R, and the source buttons beneath — AirPlay selected, with Radio and Aux beside it.

Set up each zone once

Name your zones and your sources, then set bass, treble, and balance for each one, up to seven steps either side of flat. The kitchen can sit brighter than the living room, and the settings are stored on the amplifier itself, not on your phone. With Pro, you can give a zone a maximum volume. The app's slider stops there, and while the app is open, a zone turned up past it from a wall keypad is turned back down within a few seconds.

A group card named Main Floor: one fader at 60 percent and one mute and power control for both its zones, with Kitchen and Living Room listed beneath, both playing AirPlay. The house-wide Mute All and All On buttons sit above it and the next zone begins below.

Group the zones you play together

Group the zones you always play at once and one fader moves them all, holding the levels you already set between them. A long press and a name makes the group; zones join or leave it the same way. It gets one mute and one power control for everything inside it — and any zone in it is still one tap away on its own.

The party mode sheet, headed "Party Mode" between Cancel and Start, with a line beneath marked Pro: "Party mode is a Pro feature you're using now". Then a starting volume of 47 percent with its fader, and a grid of six sources with AirPlay selected.

Pro

The whole house on one track

Party mode puts every zone on one source at one level and keeps them together: turn it up in the kitchen and the patio follows. You choose the source and the starting volume before anything changes, and you can leave zones out. When the party ends, nothing jumps — every zone stays on the source and level it had.

A shortcut named Let's Party in the Shortcuts app, under a purple party-popper icon: an Electrofonic "Party time" action, then "Medium in All Zones", then Apple's Play Music.

Pro

Use Siri and Shortcuts

Ask Siri to mute a zone, turn one up, play a source, or start a party, with the app closed. Siri tells you which zones it actually changed, rather than just saying OK. You can also build your own shortcut and run it from the Home Screen, a widget, or the Action button.

Made for iPhone

Electrofonic is a native iOS app and behaves like one. Text appears at the size you've set on your iPhone, and the layout adjusts instead of breaking. Sliders tick under your thumb one step at a time and stop at the maximum you set for that zone. It's dark by default, and light if you'd rather — one tap in Settings.

The same care goes into accessibility. VoiceOver support is first-class: every control can be reached and reads out its real value, from the first screen of setup on. Turn on Increase Contrast and the sliders, their tracks, and the grayed-out states all get darker. Turn on Reduce Motion and the app stops moving.

Does it work with my amp?

Electrofonic works with many popular multizone amplifiers, listed below. If yours is here, it should work. If it isn't, it might: many of these are the same hardware sold under different names, so send us the model and we'll give you a straight answer.

  • Dayton Audio DAX666 zones
  • Monoprice 107616 zones
  • Monoprice 392616 zones · Preamplifier
  • Monoprice 445188 zones
  • Monoprice 445194 zones
  • OSD Audio Nero Control126 zones · Preamplifier
  • OSD Audio Nero Max126 zones
  • OSD Audio Nero Max84 zones
  • Soundavo WS66i6 zones

Every one of them takes 6 sources. They also daisy-chain: up to 3 units act as one system, and they don't have to match. Electrofonic addresses every zone across the chain, so a house bigger than one unit is still one screen.

You shouldn't need to look up an IP address. On a typical home network, Electrofonic finds the amplifier itself, connects, and remembers it. If it doesn't, Support explains what to check and how to enter the address yourself.

Before you download

A few things worth knowing first. Support covers each of them in more detail.

  • It's an iPhone app. It needs iOS 18 or later.
  • Your iPhone has to be on the same network as the amplifier. A guest network, or a VPN that routes all traffic, will stop it connecting.
  • iOS will ask for Local Network permission. The app can't reach the amplifier without it. If it's denied, you can turn it back on in the Settings app, under Electrofonic.
  • One controller at a time. Most of these amplifiers accept a single control connection, so close any other app that's connected to yours first.
  • Siri can't take "turn down the volume". iOS sends anything that sounds like a volume request to the phone's own volume before an app hears it. Shorter phrases, and shortcuts you name yourself, do work.

Get Electrofonic

Electrofonic requires a supported multizone amplifier on your network and an iPhone running iOS 18 or later.

The app is free, and the free app controls every zone: power, source, volume, mute, tone, names, and groups. Pro adds party mode, a maximum volume for each zone, hiding the zones you never wired, and Siri and Shortcuts. Try it free for 21 days on your own amplifier, then keep it with a one-time purchase or a yearly subscription. If Pro ends, nothing you set up is deleted. Demo mode shows every Pro feature too, with no time limit.

Coming to the App Store

Requires iPhone, iOS 18 or later.